Home / Business / Silo Construction / Aluminum Silo
EJIN is able to fabricate big Aluminum Silo from 600 up to 2000. In case of big Silo(material of silo is sus or carbon steel, etc) , Usually the silo shall be fabricated at plant site which the silo shall be installed. so many fabrication cost and time is neeeded. But Aluminum Silo is fabricated each parts at the shop, and then The silo is only assembled and instolled at site.

This is an advantage of Aluminum Silo that can reduce manrfacture cost and period for instollation of silo at plant site also the silo is very light therefore handling is easy.
Dimensions (mm)    
  A B C D
50 9,500 3,970 1,800 2,500
70 10,600 4,230 1,800 2,800
100 10,800 4,660 1,800 3,300
150 12,200 5,100 1,800 3,800
200 15,000 4,270 1,800 4,000
300 19,500 5,530 1,800 4,300
400 23,000 5,780 1,800 4,600
500 24,000 6,130 1,800 5,000
600 24,700 6,480 1,800 5,400
800 26,700 7,000 1,800 6,000
1200 28,300 7,430 1,800 6,500
1500 32,800 8,210 1,800 7,400
2000 33,700 9,080 1,800 8,400
1) Light weight : Aluminum silo is light so have convenience in fabrication and process.
2) Corrosion resistance : Suitable for silo for synthetic resin silo
3) Processing : Easy process of fabrication by physical properties of aluminum
4) Economical efficiency : Fabrication & instollation period and labor costs are reduced by easy
                                       transportation and fabrication process of silo.
                                       Cost is about 30% lower than Stainless steel silo.
5) Air tight : Have ability of perfect airtight by welding inside of AL silo.
6) Eco-friendly : No acid cleaning as like stainless steel silo.